x86 Instruction Set Reference

# PANDN

# Logical AND NOT

Opcode Mnemonic Description
0F DF /r PANDN mm, mm/m64 Bitwise AND NOT of mm/m64 and mm.
66 0F DF /r PANDN xmm1, xmm2/m128 Bitwise AND NOT of xmm2/m128 and xmm1.

# Description

Performs a bitwise logical NOT of the destination operand (first operand), then performs a bitwise logical AND of the source operand (second operand) and the inverted destination operand. The result is stored in the destination operand. The source operand can be an MMX technology register or a 64-bit memory location or it can be an XMM register or a 128-bit memory location. The destination operand can be an MMX technology register or an XMM register. Each bit of the result is set to 1 if the corresponding bit in the first operand is 0 and the corresponding bit in the second operand is 1; otherwise, it is set to 0.

# Operation

Destination = ~Destination & Source;
1
2

# Flags affected

None.

# Protected Mode Exceptions
#GP(0) If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. (128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment.
#GP(0) If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. (128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment.
#SS(0) If a memory operand effective address is outside the SS segment limit.
#UD If EM in CR0 is set. 128-bit operations will generate #UD only if OSFXSR in CR4 is 0. Execution of 128-bit instructions on a non-SSE2 capable processor (one that is MMX technology capable) will result in the instruction operating on the mm registers, not #UD.
#NM If TS in CR0 is set.
#MF (64-bit operations only) If there is a pending x87 FPU exception.
#PF(fault-code) If a page fault occurs.

# Real-Address Mode Exceptions
#GP(0) (128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside of the effective address space from 0 to FFFFH.
#GP(0) (128-bit operations only) If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside of the effective address space from 0 to FFFFH.
#UD If EM in CR0 is set. 128-bit operations will generate #UD only if OSFXSR in CR4 is 0. Execution of 128-bit instructions on a non-SSE2 capable processor (one that is MMX technology capable) will result in the instruction operating on the mm registers, not #UD.
#NM If TS in CR0 is set.

# Virtual-8086 Mode Exceptions

Same exceptions as in Real Address Mode
#PF(fault-code) For a page fault.
#PF(fault-code) For a page fault.

# Numeric Exceptions

None.

Instruction Latency Throughput Execution Unit
CPUID 0F3n/0F2n/069n 0F3n/0F2n/069n 0F2n
PANDN mm, mm 2/2/- 1/1/- MMX_ALU
PANDN xmm, xmm 2/2/1 2/2/1 MMX_ALU

← PAUSE →