x86 Instruction Set Reference

# CVTSD2SS

# Convert Scalar Double-Precision Floating-Point Value to Scalar Single-Precision Floating-Point Value

Opcode Mnemonic Description
F2 0F 5A /r CVTSD2SS xmm1, xmm2/m64 Convert one double-precision floating-point value in xmm2/m64 to one single-precision floating-point value in xmm1.

# Description

Converts a double-precision floating-point value in the source operand (second operand) to a single-precision floating-point value in the destination operand (first operand). The source operand can be an XMM register or a 64-bit memory location. The destination operand is an XMM register. When the source operand is an XMM register, the double-precision floating-point value is contained in the low quadword of the register. The result is stored in the low doubleword of the destination operand, and the upper 3 doublewords are left unchanged. When the conversion is inexact, the value returned is rounded according to the rounding control bits in the MXCSR register.

# Operation

Destination[0..31] = ConvertDoubleToFloat(Source[0..63]);
//Destination[32..127] remains unchanged
1
2
3

# SIMD Floating-Point Exceptions

Overflow, Underflow, Invalid, Precision, Denormal.

# Protected Mode Exceptions
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.
#SS(0) For an illegal address in the SS segment.
#PF(fault-code) For a page fault.
#NM If TS in CR0 is set.
#XM If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 1.
#UD If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 0. If EM in CR0 is set. If OSFXSR in CR4 is 0. If CPUID feature flag SSE2 is 0.

# Real-Address Mode Exceptions
#GP(0) If any part of the operand lies outside the effective address space from 0 to FFFFH.
#GP(0) If any part of the operand lies outside the effective address space from 0 to FFFFH.
#NM If TS in CR0 is set.
#XM If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 1.

# Virtual-8086 Mode Exceptions

Same exceptions as in Real Address Mode
#PF(fault-code) For a page fault.
#PF(fault-code) For a page fault.
Instruction Latency Throughput Execution Unit
CPUID 0F3n/0F2n/069n 0F3n/0F2n/069n 0F2n
CVTSD2SS xmm, xmm 17/16/4 2/4/1 FP_ADD MMX_SHFT

← CVTSI2SD →