x86 Instruction Set Reference

# CVTDQ2PS

# Convert Packed Doubleword Integers to Packed Single-Precision Floating-Point Values

Opcode Mnemonic Description
0F 5B /r CVTDQ2PS xmm1, xmm2/m128 Convert four packed signed doubleword integers from xmm2/m128 to four packed single-precision floating-point values in xmm1.

# Description

Converts four packed signed doubleword integers in the source operand (second operand) to four packed single-precision floating-point values in the destination operand (first operand). The source operand can be an XMM register or a 128-bit memory location. The destination operand is an XMM register. When a conversion is inexact, rounding is performed according to the rounding control bits in the MXCSR register.

# Operation

Destination[0..31] = ConvertIntegerToFloat(Source[0..31]);
Destination[32..63] = ConvertIntegerToFloat(Source[32..63]);
Destination[64..95] = ConvertIntegerToFloat(Source[64..95]);
Destination[96..127] = ConvertIntegerToFloat(Source[96..127]);
1
2
3
4
5

# SIMD Floating-Point Exceptions

Precision.

# Protected Mode Exceptions
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments. If a memory operand is not aligned on a 16-byte boundary, regardless of segment.
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments. If a memory operand is not aligned on a 16-byte boundary, regardless of segment.
#SS(0) For an illegal address in the SS segment.
#PF(fault-code) For a page fault.
#NM If TS in CR0 is set.
#XM If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 1.

# Real-Address Mode Exceptions
#GP(0) If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside the effective address space from 0 to FFFFH.
#GP(0) If a memory operand is not aligned on a 16-byte boundary, regardless of segment. If any part of the operand lies outside the effective address space from 0 to FFFFH.
#NM If TS in CR0 is set.
#XM If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 1.

# Virtual-8086 Mode Exceptions

Same exceptions as in Real Address Mode
#PF(fault-code) For a page fault.
Instruction Latency Throughput Execution Unit
CPUID 0F3n/0F2n 0F3n/0F2n 0F2n
CVTDQ2PS xmm, xmm 5/5 2/2 FP_ADD

← CVTPD2DQ →