x86 Instruction Set Reference

# MINSD

# Return Minimum Scalar Double-Precision Floating-Point Value

Opcode Mnemonic Description
F2 0F 5D /r MINSD xmm1, xmm2/m64 Return the minimum scalar double-precision floating-point value between xmm2/mem64 and xmm1.

# Description

Compares the low double-precision floating-point values in the destination operand (first operand) and the source operand (second operand), and returns the minimum value to the low quadword of the destination operand. The source operand can be an XMM register or a 64-bit memory location. The destination operand is an XMM register. When the source operand is a memory operand, only the 64 bits are accessed. The high quadword of the destination operand remains unchanged.

If the values being compared are both 0.0s (of either sign), the value in the second operand (source operand) is returned. If a value in the second operand is an SNaN, that SNaN is returned unchanged to the destination (that is, a QNaN version of the SNaN is not returned).

If only one value is a NaN (SNaN or QNaN) for this instruction, the second operand (source operand), either a NaN or a valid floating-point value, is written to the result. If instead of this behavior, it is required that the NaN source operand (from either the first or second operand) be returned, the action of MINSD can be emulated using a sequence of instructions, such as, a comparison followed by AND, ANDN and OR.

# Operation

if((Destination[0..63] == 0.0 && Source[0..63] == 0.0) || IsSNaN(Destination[0..63]) || IsSNaN(Source[0..63]) || Destination[0..63] >= Source[0..63]) Destination[0..63] = Source[0..63];
//Destination[64..127] is unchanged
1
2
3

# SIMD Floating-Point Exceptions
Invalid (including QNaN source operand), Denormal.

# Protected Mode Exceptions
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.
#GP(0) For an illegal memory operand effective address in the CS, DS, ES, FS or GS segments.
#SS(0) If a memory operand effective address is outside the SS segment limit.
#PF(fault-code) For a page fault.
#NM If TS in CR0 is set.
#XM If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 1.
#UD If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 0. If EM in CR0 is set. If OSFXSR in CR4 is 0. If CPUID feature flag SSE2 is 0.

# Real-Address Mode Exceptions
#GP(0) If any part of the operand lies outside the effective address space from 0 to FFFFH.
#GP(0) If any part of the operand lies outside the effective address space from 0 to FFFFH.
#NM If TS in CR0 is set.
#XM If an unmasked SIMD floating-point exception and OSXMMEXCPT in CR4 is 1.

# Virtual-8086 Mode Exceptions

Same exceptions as in Real Address Mode
#PF(fault-code) For a page fault.
#PF(fault-code) For a page fault.
Instruction Latency Throughput Execution Unit
CPUID 0F3n/0F2n/069n 0F3n/0F2n/069n 0F2n
MINSD xmm, xmm 5/4/3 2/2/1 FP_ADD

← MINSS →